`

Centos6.0 Oracle11gR2 静默命令行安装[转]

 
阅读更多

http://dadloveu.blog.51cto.com/715500/943060

 

1 安装前环境:
  操作系统:CetnOS6.2x64 最小化安装,已配置好网络IP:172.16.2.182,物理内存8GB,硬盘100GB。
  已下载: linux.x64_11gR2_database_1of2.zip
     linux.x64_11gR2_database_2of2.zip
     位于目录/opt/
    
2 准备工作
 root用户登录后
 #yum install vim       //个人喜好vim编辑各种配置文件,所以先下一个
 #yum install unzip       //下载unzip,用来解压上述两个压缩文件
 #cd /opt         //切换当前目录到oracle压缩文件所在目录
 #unzip linux.x64_11gR2_database_1of2.zip //解压
 #unzip linux.x64_11gR2_database_2of2.zip
 解压后新增一个/opt/database目录,里面是解压后的所有oracle安装文件。
 
 在/etc/hosts文件中增加主机名(通过hostname获得)到回环IP的映射如下:
 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4 oracle11gcentos6.dlxg.gov.cn
 ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6 oracle11gcentos6.dlxg.gov.cn
 
 #vim /etc/selinux/conf  设置 SELINUX=disabled
 #setenforce 0   //关闭selinux
 #service iptables stop //临时关闭防火墙
 
3 安装必须的包
 #yum install gcc
 #yum install make
 #yum install binutils
 #yum install gcc-c++
 #yum install compat-libstdc++-33
 #yum install elfutils-libelf-devel
 #yum install elfutils-libelf-devel-static
 #yum install ksh
 #yum install libaio
 #yum install libaio-devel
 #yum install numactl-devel
 #yum install sysstat
 #yum install unixODBC
 #yum install unixODBC-devel
 #yum install pcre-devel
 
4 准备安装用户及用户组
 #groupadd oinstall
 #groupadd dba
 #useradd -g oinstall -G dba -d /home/oracle oracle
 #passwd oracle          //设置oracle密码

5 修改内核参数配置文件
 #vim /etc/sysctl.conf 在文件最后增加
 fs.aio-max-nr = 1048576
 fs.file-max = 6553600
 kernel.shmall = 2097152
 kernel.shmmax = 2147483648
 kernel.shmmni = 4096
 kernel.sem = 250 32000 100 128
 net.ipv4.ip_local_port_range = 1024 65000
 net.core.rmem_default = 262144
 net.core.rmem_max = 4194304
 net.core.wmem_default = 262144
 net.core.wmem_max = 1048586
 保存文件。
 #/sbin/sysctl -p          //让参数生效
 
6 修改用户的限制文件
 #vim /etc/security/limits.conf 在文件后增加
 oracle           soft    nproc           2047
 oracle           hard    nproc           16384
 oracle           soft    nofile          1024
 oracle           hard    nofile          65536
 oracle           soft    stack           10240
 保存文件。
 修改/etc/pam.d/login文件,增加如下:
 session  required   /lib64/security/pam_limits.so  //64为系统,千万别写成/lib/security/pam_limits.so,否则导致无法登录
 session     required      pam_limits.so
 修改/etc/profile,增加:
 if [ $USER = "oracle" ]; then
  if [ $SHELL = "/bin/ksh" ]; then
   ulimit -p 16384
   ulimit -n 65536
  else
   ulimit -u 16384 -n 65536
  fi
 fi

7 创建安装目录和设置文件权限
 #mkdir /opt/oracle
 #mkdir /opt/oracle/11.2.0  //数据库系统安装目录
 #mkdir /opt/oradata    //数据库数据安装目录
 #mkdir /opt/oradata_back  //数据备份目录
 #mkdir /home/oracle/inventory //清单目录
 #chown -R oracle:oinstall /opt/oracle
 #chown -R oracle:oinstall /home/oracle/inventory
 #chomod -R 775 /opt/oracle

8 编辑静默安装响应文件
 #su - oracle
 $cp -R /opt/database/response /home/oracle  //复制一份模板
 $cd /home/oracle
 $mv db_install.rsp db_install_swonly.rsp //因为下面的安装是只安装软件不安装启动数据库实例,所以改个名字以提示自己
 $vim db_install_swonly.rsp     //开始修改这个安装响应文件
 
 需要设置的选项如下:
 oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0  //系统生成的,不要修改
 oracle.install.option=INSTALL_DB_SWONLY               //只安装软件,不安装启动数据库
 ORACLE_HOSTNAME=oracle11gcentos6.dlxg.gov.cn             //通过hostname命令获得
 UNIX_GROUP_NAME=oinstall
 INVENTORY_LOCATION=/home/oracle/inventory
 SELECTED_LANGUAGES=en,zh_CN
 ORACLE_HOME=/opt/oracle/11.2.0
 ORACLE_BASE=/opt/oracle
 oracle.install.db.InstallEdition=EE
 oracle.install.db.isCustomInstall=false
 
 oracle.install.db.customComponents=oracle.server:11.2.0.1.0,         //保持系统默认值
  oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,
  oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,
  oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,
  oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,
  oracle.rdbms.dv:11.2.0.1.0,orcle.rdbms.lbac:11.2.0.1.0,
  oracle.rdbms.rat:11.2.0.1.0
 
 oracle.install.db.DBA_GROUP=dba
 oracle.install.db.OPER_GROUP=dba
 DECLINE_SECURITY_UPDATES=true                 //一定要设置为true
9 根据响应文件安装oracle
 $cd /opt/database
 $./runInstaller -silent -responseFile /home/oracle/response/db_install_swonly.rsp
 安装过程中,如果提示[WARNING]不必理会,此时安装程序仍在进行,如果出现[FATAL],则安装程序已经停止了。打开另一个终端,执行
 #tail -100f /home/oracle/inventory/logs/installActions......log
 可以实时跟踪查看安装日志,了解安装的进度。
 当出现
  以下配置脚本需要以 "root" 用户的身份执行。
   #!/bin/sh
   #要运行的 Root 脚本

  /home/oracle/inventory/orainstRoot.sh
  /opt/oracle/11.2.0/root.sh
  要执行配置脚本, 请执行以下操作:
     1. 打开一个终端窗口
     2. 以 "root" 身份登录
     3. 运行脚本
     4. 返回此窗口并按 "Enter" 键继续

  Successfully Setup Software.
 表示安装成功了。按照其提示操作。
 $exit  //退回到root
 #/home/oracle/inventory/orainstRoot.sh
 #/opt/oracle/11.2.0/root.sh
 

 
10 编辑静默建库响应文件
 $cd /home/oracle
 $mv dbca.rsp dbca_hello.rsp   //改名为dbca_数据库名.rsp
 
11 静默配置监听

 $netca /silent /responsefile /home/oracle/response/netca.rsp
 正在对命令行参数进行语法分析:
 参数"silent" = true
 参数"responsefile" = /home/oracle/response/netca.rsp
 完成对命令行参数进行语法分析。
 Oracle Net Services 配置:
 完成概要文件配置。
 Oracle Net 监听程序启动:
  正在运行监听程序控制:
    /opt/oracle/11.2.0/bin/lsnrctl start LISTENER
  监听程序控制完成。
  监听程序已成功启动。
 监听程序配置完成。
 成功完成 Oracle Net Services 配置。退出代码是0

 成功运行后,在/opt/oracle/11.2.0/network/admin目录下生成sqlnet.ora和listener.ora两个文件。

 通过netstat -tlnp 命令,看到
 tcp  0   0 :::1521        :::*      LISTEN      5477/tnslsnr
 说明监听器已经在1521端口上开始工作了。
 
12 静默建立新库(同时也建立一个对应的实例)
  修改/home/oracle/response/dbca.rsp,设置如下:
 RESPONSEFILE_VERSION = "11.2.0"  //不能更改
 OPERATION_TYPE = "createDatabase"
 GDBNAME = "hello.dlxg.gov.cn"  //数据库的名字
 SID = "hello"    //对应的实例名字
 TEMPLATENAME = "General_Purpose.dbc" //建库用的模板文件
 SYSPASSWORD = "gnotsms"   //SYS管理员密码
 SYSTEMPASSWORD = "gnotsms"  //SYSTEM管理员密码
 DATAFILEDESTINATION = /opt/oracle/oradata //数据文件存放目录
 RECOVERYAREADESTINATION=/opt/oracle/oradata_back //恢复数据存放目录
 CHARACTERSET = "ZHS16GBK"   //字符集,重要!!! 建库后一般不能更改,所以建库前要确定清楚。
 TOTALMEMORY = "5120"    //oracle内存5120MB

 静默建库命令如下
 $dbca -silent -responseFile /home/oracle/response/dbca.rsp
 复制数据库文件
 1% 已完成
 3% 已完成
 11% 已完成
 18% 已完成
 26% 已完成
 37% 已完成
 正在创建并启动 Oracle 实例
 40% 已完成
 45% 已完成
 50% 已完成
 55% 已完成
 56% 已完成
 60% 已完成
 62% 已完成
 正在进行数据库创建
 66% 已完成
 70% 已完成
 73% 已完成
 85% 已完成
 96% 已完成
 100% 已完成
 有关详细信息, 请参阅日志文件 "/opt/oracle/cfgtoollogs/dbca/hello/hello.log"。

 查看日志文件
 $ cat /opt/oracle/cfgtoollogs/dbca/hello/hello.log
 复制数据库文件
 DBCA_PROGRESS : 1%
 DBCA_PROGRESS : 3%
 DBCA_PROGRESS : 11%
 DBCA_PROGRESS : 18%
 DBCA_PROGRESS : 26%
 DBCA_PROGRESS : 37%
 正在创建并启动 Oracle 实例
 DBCA_PROGRESS : 40%
 DBCA_PROGRESS : 45%
 DBCA_PROGRESS : 50%
 DBCA_PROGRESS : 55%
 DBCA_PROGRESS : 56%
 DBCA_PROGRESS : 60%
 DBCA_PROGRESS : 62%
 正在进行数据库创建
 DBCA_PROGRESS : 66%
 DBCA_PROGRESS : 70%
 DBCA_PROGRESS : 73%
 DBCA_PROGRESS : 85%
 DBCA_PROGRESS : 96%
 DBCA_PROGRESS : 100%
 数据库创建完成。有关详细信息, 请查看以下位置的日志文件:
  /opt/oracle/cfgtoollogs/dbca/hello。
 数据库信息:
 全局数据库名:hello.dlxg.gov.cn
 系统标识符 (SID):hello

 建库后实例检查:
 $ ps -ef | grep ora_ | grep -v grep | wc -l
 21
 $ ps -ef | grep ora_ | grep -v grep
 oracle    5955     1  0 07:03 ?        00:00:00 ora_pmon_hello
 oracle    5957     1  0 07:03 ?        00:00:00 ora_vktm_hello
 oracle    5961     1  0 07:03 ?        00:00:00 ora_gen0_hello
 oracle    5963     1  0 07:03 ?        00:00:00 ora_diag_hello
 oracle    5965     1  0 07:03 ?        00:00:00 ora_dbrm_hello
 oracle    5967     1  0 07:03 ?        00:00:00 ora_psp0_hello
 oracle    5969     1  0 07:03 ?        00:00:00 ora_dia0_hello
 oracle    5971     1  0 07:03 ?        00:00:00 ora_mman_hello
 oracle    5973     1  0 07:03 ?        00:00:00 ora_dbw0_hello
 oracle    5975     1  0 07:03 ?        00:00:00 ora_lgwr_hello
 oracle    5977     1  0 07:03 ?        00:00:00 ora_ckpt_hello
 oracle    5979     1  0 07:03 ?        00:00:00 ora_smon_hello
 oracle    5981     1  0 07:03 ?        00:00:00 ora_reco_hello
 oracle    5983     1  0 07:03 ?        00:00:00 ora_mmon_hello
 oracle    5985     1  0 07:03 ?        00:00:00 ora_mmnl_hello
 oracle    5987     1  0 07:03 ?        00:00:00 ora_d000_hello
 oracle    5989     1  0 07:03 ?        00:00:00 ora_s000_hello
 oracle    5999     1  0 07:03 ?        00:00:00 ora_qmnc_hello
 oracle    6020     1  0 07:03 ?        00:00:00 ora_cjq0_hello
 oracle    6022     1  0 07:04 ?        00:00:00 ora_q000_hello
 oracle    6024     1  0 07:04 ?        00:00:00 ora_q001_hello

 查看监听状态
 $ lsnrctl status
 LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 14-MAR-2012 07:09:03

 Copyright (c) 1991, 2009, Oracle.  All rights reserved.

 Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
 STATUS of the LISTENER
 ------------------------
 Alias                     LISTENER
 Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
 Start Date                14-MAR-2012 06:16:50
 Uptime                    0 days 0 hr. 52 min. 15 sec
 Trace Level               off
 Security                  ON: Local OS Authentication
 SNMP                      OFF
 Listener Parameter File   /opt/oracle/11.2.0/network/admin/listener.ora
 Listener Log File         /opt/oracle/diag/tnslsnr/oracle11gcentos6/listener/alert/log.xml
 Listening Endpoints Summary...
   (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
   (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
 Services Summary...
 Service "hello.dlxg.gov.cn" has 1 instance(s).
   Instance "hello", status READY, has 1 handler(s) for this service...
 Service "helloXDB.dlxg.gov.cn" has 1 instance(s).
   Instance "hello", status READY, has 1 handler(s) for this service...
 The command completed successfully
 
13 修改数据库为归档模式(归档模式才能热备份,增量备份)
 $ export ORACLE_SID=hello
 $ sqlplus / as sysdba
 SQL*Plus: Release 11.2.0.1.0 Production on Wed Mar 14 07:18:16 2012

 Copyright (c) 1982, 2009, Oracle.  All rights reserved.


 Connected to:
 Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
 With the Partitioning, OLAP, Data Mining and Real Application Testing options

 SQL> shutdown immediate;

 Database closed.
 Database dismounted.
 ORACLE instance shut down.

 SQL> startup mount

 ORACLE instance started.

 Total System Global Area 1603411968 bytes
 Fixed Size                  2213776 bytes
 Variable Size             402655344 bytes
 Database Buffers         1191182336 bytes
 Redo Buffers                7360512 bytes
 Database mounted.

 SQL> alter database archivelog;

 Database altered.

 SQL> alter database flashback on;

 Database altered.

 SQL> alter database open;

 Database altered.

 SQL> execute utl_recomp.recomp_serial();

 PL/SQL procedure successfully completed.

 SQL> alter system archive log current;

 System altered.

 SQL> exit
 Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
 With the Partitioning, OLAP, Data Mining and Real Application Testing options
 
14 修改oracle启动配置文件
 $vim /etc/oratab
 hello:/opt/oracle/11.2.0:Y

 这样就可以通过dbstart 启动此实例,也可以通过dbshut关闭此实例了。
 $ dbshut /opt/oracle/11.2.0/
 Processing Database instance "hello": log file /opt/oracle/11.2.0/shutdown.log
 此时所有oracle的进程关闭,监听器也停止。

 $dbstart /opt/oracle/11.2.0/
 Processing Database instance "hello": log file /opt/oracle/11.2.0/startup.log

 此时监听器工作,hello实例运行,再次查看监听器状态。
 $ lsnrctl status

 LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 14-MAR-2012 07:35:52

 Copyright (c) 1991, 2009, Oracle.  All rights reserved.

 Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
 STATUS of the LISTENER
 ------------------------
 Alias                     LISTENER
 Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
 Start Date                14-MAR-2012 07:35:38
 Uptime                    0 days 0 hr. 0 min. 13 sec
 Trace Level               off
 Security                  ON: Local OS Authentication
 SNMP                      OFF
 Listener Parameter File   /opt/oracle/11.2.0/network/admin/listener.ora
 Listener Log File         /opt/oracle/diag/tnslsnr/oracle11gcentos6/listener/alert/log.xml
 Listening Endpoints Summary...
   (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
   (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
 Services Summary...
 Service "hello.dlxg.gov.cn" has 1 instance(s).
   Instance "hello", status READY, has 1 handler(s) for this service...
 Service "helloXDB.dlxg.gov.cn" has 1 instance(s).
   Instance "hello", status READY, has 1 handler(s) for this service...
 The command completed successfully
 
15 建立表空间及用户
 $export ORACLE_SID=hello; sqlplus / as sysdba
 进入SQL>后
 创建临时表空间
 create temporary tablespace user_temp tempfile '/opt/oracle/oradata/hello/user_temp.dbf' size 50m
 autoextend on
 next 50m maxsize 20480m
 extent management local;

 创建数据表空间
 create tablespace user_data 
 logging 
 datafile '/opt/oracle/oradata/hello/user_data.dbf'
 size 50m 
 autoextend on 
 next 50m maxsize 20480m 
 extent management local;

 创建用户并指定表空间
 create user test identified by test
 default tablespace user_data 
 temporary tablespace user_temp;

 给用户授予权限
 grant connect,resource to test;
 
 此时在其他机器上可以远程登录这个用户,命令为:
 $sqlplus test/test@172.16.2.182/hello.dlxg.gov.cn

16 用新建的用户连接数据库,并建立一个表
 $ export NLS_LANG=American_America.AL32UTF8
 注意:UTF8是为了使得sqlplus和linux终端环境一致起来,此时发往数据库的是UTF8,数据库存储前会转为ZHS16GBK.
 当读取时,Sqlplus会把收到的ZHS16GBK转换为UTF8发送到Linux终端。

 $ sqlplus test/test@172.16.2.182/hello.dlxg.gov.cn

 SQL*Plus: Release 11.2.0.1.0 Production on Wed Mar 14 08:22:11 2012

 Copyright (c) 1982, 2009, Oracle.  All rights reserved.


 Connected to:
 Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
 With the Partitioning, OLAP, Data Mining and Real Application Testing options

 SQL> create table STUDENT(ID int, NAME varchar(20));

 Table created.

 SQL> insert into STUDENT values(1, '张三');

 1 row created.

 SQL> select * from student;

   ID NAME
 ---------- ------------------------------------------------------------
    1 张三

分享到:
评论

相关推荐

Global site tag (gtag.js) - Google Analytics